Spectralink 8002 Bedienungsanleitung PDF herunterladen (Seite 13)

SpectraLink 8002 Wireless Telephone Overview

PN: 1725-36034-001_B.doc 13

Quick Start Guide

1. A wireless LAN must be properly configured and operational

through the use of 802.11 wireless APs. Ensure WMM is enabled

on the APs.

2. Configure a TFTP server on the LAN. The TFTP server is used to

load the handset software and SIP configuration files into the

handsets. See Chapter 2

SpectraLink 8002 Wireless Telephone

Configuration

for DHCP information.

3. The supported SIP system components must be connected to your

network and completely operational.

4. Visit http://www.polycom.com/usa.en/support/voice/wi-

fi/spectralink_8002_wireless.html to download the latest handset

software and example SIP configuration files.

5. Ensure the handset software is properly loaded on the TFTP

server that has been designated for the handset code. See Chapter

3 Software License and Protocol Management, section Configuration

Process.

6. Create/modify configuration files on the SIP TFTP server to

define parameters for the SIP application. See Chapter 4

Programming the SIP Handset Features, section

SIP TFTP

Server

Configuration Files. The TFTP server may be the same one

referenced in step 2 above.

7. Configure your handset per Chapter 2

SpectraLink 8002 Wireless

Telephone Configuration

. Ensure these configuration options are

set:

— Regulatory Domain

— SIP Registration, Reg 1 and Login

— IP Addresses: DHCP or static for each listed component,

including SIP TFTP server and TFTP server.

— Security

— Preferred Channels

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 98 99

Keine Kommentare

Spectralink 8002 Bedienungsanleitung Seite 13